32 41 100 Removing and installing/replacing belt pulley on vane pump for power steering
WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Carry out preliminary work as described in 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N52K)
.
Slacken screws (1)
Relieve tension on drive belt. See 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N52K) and remove from belt pulley (2).
Unscrew bolts (1) and remove belt pulley (2).
Installation note:
Lettering on belt pulley (2) must point forwards.
Tightening torque, see 32 41 3AZ in 32 41 PUMP AND OIL SUPPLY