63 21 101 Replacing sealing frame for left or right rear light (on side panel)
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR LIGHT
Detach sealing frame for rear light (1) completely from rear light (2).
Clean bonding surface and allow to dry.
Installation:
Make sure sealing frame for rear light (1) is correctly bonded all round on rear light (2).