63 21 057 Replacing a socket housing for left or right rear light (rear lid)

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Partially remove TRIM PANEL FOR REAR LID

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Unfasten plug connection (1) and disconnect.

Unlock locking clip (2) in direction of arrow and remove socket housing for rear light (3) from rear light (4).

NOTE: Convert bulbs, replace if necessary.
See TYPE OF BULB .

Fig 1: Removing Socket Housing From Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.