63 99 273 Replacing bulb for left (or right) front turn indicator

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Version with xenon headlights: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply (lighting system and ignition off).
Work on the entire xenon lighting system (control unit, ignition unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs. See (EXTERIOR LIGHTS) .

Necessary preliminary tasks

If necessary, remove FRONT WHEEL ARCH COVER

Turn locks (1) counterclockwise through 180°.

Remove repair cover (2) from wheel arch cover (3).

Installation:

Make sure guides (4) of repair cover (2) are correctly seated in wheel arch cover (3).

Fig 1: Identifying Locks And Wheel Arch Cover

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Headlight removed for purposes of clarity.

Turn direction indicator bulb holder (1) in direction of arrow and pull out of headlight.

Fig 2: Identifying Indicator Bulb Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Twist bulb for front direction indicator (1) in direction of arrow and remove from direction indicator bulb holder (2).

Installation:

Make sure bulb for front direction indicator (1) and sealing ring (3) are correctly seated on direction indicator bulb holder (2).

Note type of bulb See DIRECTION INDICATORS or DIRECTION INDICATORS .

Fig 3: Turning Bulb For Front Direction Indicator

Courtesy of BMW OF NORTH AMERICA, INC.