65 77 604 Replacing sensor mat (OC3 mat) for passenger seat occupancy detector
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Note AIRBAG SAFETY INSTRUCTIONS
!
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
WARNING:
US/CDN front passenger seat (with OC3 mat) only:
The OC3 mat can only be removed in conjunction with the padding from the seat cover.
If OC3 mat or padding is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
The OC3 mat can only be removed in conjunction with the padding from the seat cover.
If OC3 mat or padding is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
Operation for replacing the OC3 mat in conjunction with padding and seat cover is described in:
- Remove padding for front seat . See REPLACING SEAT COVER FOR LEFT OR RIGHT FRONT SEAT (M3 SPORT SEAT) or REPLACING SEAT COVER FOR LEFT OR RIGHT FRONT SEAT (SPORT/MANUAL)
Enabling seat occupancy detector (OC3 mat):
- Connect vehicle programming and encoding scan tool.
- Code airbag control unit
- Clear fault memory if necessary