41 51... Replacing Door Hinge Bushing (Door Removed)

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Set of special tools 411150 comprises:

Bush41 1 151

Screw41 1 152

Fig 1: Identifying Bush (41 1 151) And Screw (41 1 152)

Courtesy of BMW OF NORTH AMERICA, INC.

Cut off hinge bushing in area (1) with chisel.

Drive out remainder of hinge bushing with punch.

Fig 2: Identifying Hinge Bushing Cut Off Area

Courtesy of BMW OF NORTH AMERICA, INC.

Insert screw 41 1 152 with new hinge bushing (2) into hinge.

Screw bushing 41 1 151 with flat end (3) pointing upwards onto screw 41 1 152.

Turn bushing 41 1 151 until taper (1) borders hinge bushing.

Unscrew bushing 41 1 151 again.

Fig 3: Identifying Hinge Bushing With Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.

Twist bushing 41 1 151 with flat end (1) onto screw41 1 152.

Turn bushing 41 1 151 until gap dimensions (2) are identical.

Fig 4: Identifying Bushing 41 1 151 Gap

Courtesy of BMW OF NORTH AMERICA, INC.