41 0 0 Contents Of Body Repair General Information
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
General Information
Safety regulations
- SAFETY AT WORK
- INFORMATION ON HAZARDS
- Information on VEHICLE PROTECTION
Materials
- MATERIALS SCIENCE
- USE OF MATERIALS in outer skin
- EXPENDABLE MATERIALS
Handling components after an accident
- ELECTRICAL SYSTEM, electronics and optical fibre
- Vehicles with Hybrid drive
Passive safety See 4100... HANDLING AIRBAGS AND RESTRAINT SYSTEMS or 7212... PROCEDURE AFTER AIRBAG TRIGGERING AS RESULT OF AN ACCIDENT
- CHASSIS, SUSPENSION AND STEERING
- Folding roof
Body dimensions
Cavity sealing
- Installation of shaped parts See 4100... INSTALLING A CAVITY ACOUSTIC BAFFLE (EXPANDED) ; 4100... INSTALLING A CAVITY ACOUSTIC BAFFLE (NOT EXPANDED) or 4100... INSTALLING A CAVITY SEALING WITH 2-COMPONENT PU CAVITY FOAM
- Position of shaped parts . See 4100... POSITION OF SHAPED PARTS FOR CAVITY BULKHEAD
Vehicle identification number
- VEHICLE IDENTIFICATION NUMBER, GENERAL
- Stamping vehicle identification number See 4100... STAMPING VEHICLE IDENTIFICATION NUMBER
Repair techniques
- REPAIR STAGE 1 : All repairs that only provide for replacement of screwed/bolted components and planishing operations.
- REPAIR STAGE 2 : Repairs that are carried out by bonding and riveting without the use of a straightening bench.
- REPAIR STAGE 3 : Repairs that are carried out by bonding and riveting with the use of a straightening bench or welding.
Corrosion protection