52 26 020 Removing and installing/replacing both backrests for rear seat
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, and 2009 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove ARMREST SIDE SECTION
- Remove REAR SEAT
NOTE:
A 2nd person is required to help remove and install the backrest.
Left backrest:
- Release screw (1).
Tightening torque 52 26 01AZ .
- Lay belt (2) around center armrest
- Fold backrest forwards slightly (3)
- Pull backrest forwards and outwards out of center mount (4)
Right backrest:
- Release screw (1).
Tightening torque 52 26 01AZ .
- Fold backrest forwards slightly (2)
- Pull backrest forwards and outwards out of center mount (3)