52 24 199 Removing and installing/replacing rear panel on left rear seat backrest
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, and 2009 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove BACKREST FOR REAR SEAT
Rear panel (1) on backrest.
Detach rear panel (2) with flat scraper (1) from rear seat backrest.
Installation:
Comply with instructions issued by manufacturer of universal spray adhesive.
Apply universal spray adhesive to rear panel and rear seat backrest.
Fit and align rear panel within the air drying time (see manufacturer's instructions).
Observe and adhere to curing time to prevent rear panels from slipping.