16 11 350 Replacing tensioning straps for fuel tank
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Partially detach REAR UNDERBODY PANELLING
IMPORTANT:
Secure fuel tank against slipping and falling out.
Heavily support the fuel tank.
Release screws (1) and remove clamping band.
Installation:
Tightening torque 16 11 2AZ .