67 13 001 Replacing drive unit for electrically operated left or right door mirror

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove MIRROR GLASS for mirror

Release screw (1).

Remove drive for electrically operated door mirror (2) in direction of arrow from mirror housing (3).

Fig 1: Removing Drive For Electrically Operated Door Mirror

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit drive for electrically operated door mirror (1) so that pin housing (2) engages exactly in plug housing (3) and locators (4) slide into guides (5).

Fig 2: Identifying Electrically Operated Door Mirror, Pin Housing, Plug Housing And Locators

Courtesy of BMW OF NORTH AMERICA, INC.