64 11 212 Removing and installing/replacing heater/air conditioner fan
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove TRIM FOR INSTRUMENT PANEL , bottom right
- Partially release air duct at side
Disconnect plug connection (1).
Carefully raise lug (1) and feed out housing (2) by turning clockwise.
Installation:
Lug (1) must not be damaged and must snap audibly into place.
Replacement