72 14... Removing and installing/replacing Top Tether eyelets for child seat

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

Tightening torque 52 24 03AZ .

Fig 1: Identifying Covers With Top Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Ensure Top Tether eyelets (1) are in correct installation position.
It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Identifying Top Tether Eyelets With Head Restraints

Courtesy of BMW OF NORTH AMERICA, INC.