LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2792 (Trailer - Repair - E90) >> Hood >> 86 21... Adjusting rotary striker lock

86 21... Adjusting rotary striker lock

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

The following text describes how to adjust the rotary striker lock on the rear lid as an example. Proceed in the same way for the side lids. Adjust the lock while the lid is open. 

Release screws (1) and adjust rotary striker lock (2) in elongated hole area in direction of arrows.

Installation 

Tightening Torque,

Refer to TIGHTENING TORQUE 86 21 12AZ.

Fig 1: Adjusting Rotary Striker Lock In Hole
G04766459Courtesy of BMW OF NORTH AMERICA, INC.