36 11 105 Removing and installing RDC (Tyre Pressure Control) control unit (LOW COST)

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).

Necessary preliminary work

Remove COVER FOR CARBON CANISTER .

Disconnect plug connection (1).

Press retaining tabs (2) apart as indicated by arrow.

Pull out TPC control unit

Fig 1: Identifying TPC Control Unit Plug Connection And Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Carry out Vehicle programming and encoding