34 41... Removing and installing or replacing gaiter for handbrake lever

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Unclip gaiter with special tool 00 9 317 WEDGE .

Fig 1: Removing Gaiter Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Pull gaiter (1) over handbrake lever.

Cut cable ties (2) and remove gaiter.

Installation:

Eye of cable tie must face downward

Fig 2: Identifying Handbrake Lever Gaiter And Cable Ties

Courtesy of BMW OF NORTH AMERICA, INC.