LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2789 (Body Equipment - Repair - E90) >> Trim, Covers, Handle Trim >> 51 13 025 Removing and installing/replacing left or right trim on engine hood/bonnet

51 13 025 Removing and installing/replacing left or right trim on engine hood/bonnet

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and remove trim (2) in upwards direction.

Tightening torque 51 13 7AZ .

Fig 1: Removing Trim
G06853838Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Guides (1) on trim (2) must not be damaged.

Fig 2: Identifying Guides On Trim
G06202399Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals