51 16 212 Removing and installing trim for storage compartment

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Version with manual transmission:

Remove GAITER FOR GEAR LEVER

Version with automatic transmission:

Remove finisher for preselector lever

Release trim (1) with special tool 009317 from retainers (2).

If necessary, disconnect plug connections and remove trim (1) towards top.

Fig 1: Releasing Trim With Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts on trim (3) must not be damaged or missing:

Clips
4 x foam material

Fig 2: Identifying Trim, Clips And Foam Material

Courtesy of BMW OF NORTH AMERICA, INC.