51 71 041 Removing and installing/replacing rear left or right wheel arch cover
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Prior to removing, pay attention to the exact installation position with respect to the adjoining components.
Necessary preliminary tasks
- If necessary, remove left or right REAR WHEEL
NOTE:
Work shown on the E87 by way of example, deviations in detail are possible in other models.
Release screws (1 and 2).
Release nuts (3) and expander rivet (4).
Carefully feed out wheel arch cover (5) towards bottom.
Installation:
If necessary, replace expander rivet (4).
Ensure wheel arch cover (5) is correctly seated.