51 47 065 Removing and installing/replacing finishing strip at front left or right entrance
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Risk of damage!
Do not raise finishing strip (2) over entire length simultaneously.
Do not raise finishing strip (2) over entire length simultaneously.
Unclip clips (1) for finishing strip (2) with special tool 00 9 317 .
Remove finishing strip (2).
Installation:
If necessary, replace faulty clips (1).