61 31 270 Replacing switch for reversing light

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The installation location of the reversing light switch can vary, depending on the transmission model.

Necessary preliminary tasks

If necessary, remove rear underbody protection

Version A:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque 61 31 2AZ .

Fig 1: Identifying Plug Connection And Switch For Reversing Light (Version A)

Courtesy of BMW OF NORTH AMERICA, INC.

Version B:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque 61 31 2AZ .

Fig 2: Identifying Plug Connection And Switch For Reversing Light (Version B)

Courtesy of BMW OF NORTH AMERICA, INC.