61 31 133 Removing and installing/replacing AV connection socket

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Grip behind trim (1) from below and release catch (2) (risk of damage).

NOTE: Version with rear air conditioning is shown.

Fig 1: Releasing Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 3) and guides (2) must not be damaged.

Fig 2: Identifying Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Lever AV connection socket (1) with a suitable tool (2) upwards out of storage compartment (3).

Fig 3: Removing AV Connection Socket Using Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove AV connection socket (2) upwards out of storage compartment (3).

Installation:

Locks (4) must not be damaged.

Make AV connection socket (1) is correctly seated in storage compartment (3).

Fig 4: Identifying Storage Compartment With AV Connection Socket, Plug Connection And Locks

Courtesy of BMW OF NORTH AMERICA, INC.