61 31 083 Removing and installing/replacing switch for unlocking rear lid

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: To facilitate handling, unclip OBD socket cover (1).

Unclip rear lid unlocking switch (2) in direction of arrow.

Disconnect associated plug connection and remove switch for unlocking rear lid (2).

Fig 1: Removing Rear Lid Unlocking Switch

Courtesy of BMW OF NORTH AMERICA, INC.