LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2787 (Maintenance And General Information - Repair - E90) >> Maintenance And General Data >> 00..... Information on service functions for twin clutch transmission (GS7D36SG)

00..... Information on service functions for twin clutch transmission (GS7D36SG)

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The service functions must be carried out in the relevant order!
SERVICE FUNCTIONS FOR TWIN CLUTCH TRANSMISSION (GS7D36SG)

Replacement of clutch and after all work on opened transmission
  1. Carry out fluid adjustment
  2. Teach in valve characteristic curves
  3. Teach in kiss point
  4. Parking lock hook test
Replacement of oil pump
  1. Carry out fluid adjustment
  2. Teach in valve characteristic curves
  3. Teach in kiss point
  4. Parking lock hook test
Replacement of transmission (complete)
  1. Read out transmission data before replacement
  2. Parking lock hook test
  3. Write transmission data
  4. Carry out fluid adjustment
Replacement/repair of parking lock cable, selector lever with parking lock unit
  1. Parking lock hook test
Replacement of combination sensor
  1. Carry out fluid adjustment
  2. Teach in valve characteristic curves
  3. Teach in kiss point
  4. Parking lock hook test
Opening/replacement of fluid adjustment screw, repair/replacement of transmission fluid cooler, oil cooler lines, thermostat, water/oil heat exchanger (M3) and seals
  1. Carry out fluid adjustment