00 00... Underbody incl. all visible components: checking for damage, leaks, corrosion
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect underbody:
- For leaks (transmission, fuel system, brake components, steering)
- For correct routing of electrical leads (brake pad sensor, pulse generator)
- For leaks (shock absorber) and mounting (springs) rebound
- Damage to underbody
- Corrosion on underbody
IMPORTANT:
If damage to the underbody is identified:
Rectify identified faults after consulting with customer and issue a separate invoice.
- If necessary, remove panels from underbody.
- Check mountings and fixtures and brake and fuel lines for damage and correct installation position.
Rectify identified faults after consulting with customer and issue a separate invoice.