86 21 Hood
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HOOD
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Roof railing, front and rear, to roof railing adapter | M8 | 22.5 Nm | ||
| 2AZ Roof railing, middle, to roof railing adapter | M8 | 22.5 Nm | ||
| 3AZ Roof railing, front and rear, to support | M6 | 15 Nm | ||
| 4AZ Roof railing, middle, to support | M6 | 10 Nm | ||
| 5AZ Upper lock striker fixture to lower lock striker fixture | M8 | 27 Nm | ||
| 6AZ Hinge, side lid, to support | M8 | 27 Nm | ||
| 7AZ Support, lid to lid | M8 | 23 Nm | ||
| 8AZ Screw, depth adjustment, side lid | M8 | 27 Nm | ||
| 9AZ Screw, depth adjustment, rear lid | M8 | 27 Nm | ||
| 10AZ Ball pivot to retaining bracket | M8 | 23 Nm | ||
| 11AZ Retaining bracket to support | M8 | 27 Nm | ||
| 12AZ Rotary striker lock to support | M5 | 7 Nm |