51 75 001 Removing and installing/replacing left or right underbody cover

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Work shown on E90 by way of example, deviations in detail are possible in other models.

Fig 1: Identifying Clips And Underbody Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release clips (1).

Release screws (2).

Remove underbody cover (3).

Installation:

Replaced damaged clips (1).

Make sure underbody cover (3) is correctly seated.