33 17 Rear axle final drive suspension
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR AXLE FINAL DRIVE SUSPENSION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Rear differential (if nec. with bracket for vibration damper) to rear axle carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 (front) | Observe repair instruction. | 100 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 (rear) | Observe repair instruction. Replace nut |
165 Nm | ||
| 2AZ | Vibration damper to bolt connection, rear differential | E81/E82/E84/E87/E88/E90/E91/E93/E92/auβer S65 | M12 | 68 Nm | |
| 3AZ | Vibration damper on bracket | E81/E82/E84/E87/E88/E90/E91/E93/E92/auβer S65 | M12 | 68 Nm | |