33 21 Output Shaft
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft to rear axle final-drive drive flange (Torx screw with RIBBED TEETH ) | E81/E82/E87/E90/E91/E92/E93 | M8 | Replace screws | 52 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 ZNS3 | Replace screws | 70 Nm | ||
| E87 | M10 ZNS | Replace screws | 80 Nm | ||
| E90/E92/E93/S65 | M12 | Replace screws | 120 Nm | ||