31 10 Front Axle Suspension
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT AXLE SUSPENSION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Front axle support to engine support | E81/E82/E84/E87/E88/E90/E91/E92/E93/S65 | M12 | 108 Nm | |
| E92/S65, E93/S65, E90/S65 | M10 x 33 | Jointing torque | 56 Nm | ||
| Torque angle | 90° | ||||
| 2AZ | Reinforcement strut to front axle carrier/body | E90/E91/E92/E93/Heck | M10 | Replaces screws & expansion nuts | |
| Jointing torque | 56 Nm | ||||
| Torque angle | 90° | ||||
| 3AZ | Reinforcement plate to front axle carrier | E84/Allrad, E90/Allrad, E91/Allrad, E92/Allrad, E92/S65, E93/S65, E90/S65 | M10 | Replace screws | |
| Jointing torque | 56 Nm | ||||
| Torque angle | 90° | ||||
| 4AZ | Support angle for engine mount to front axle carrier | M57T2 | M8 | 19 Nm | |
| 5AZ | Reinforcement plate for engine mount to front axle carrier | M57T2 | M8 | 19 Nm | |
| 6AZ | Heat shield to front axle carrier | E81/E82/E87/E88/E90/E91/E92/E93 | M6 | 4.5 Nm | |
| E84/Allrad, E90/Allrad, E91/Allrad, E92/Allrad | self-tapping screw | 4 Nm | |||
| 7AZ | Lower pedestrian protection to front axle carrier | E84 | 25 Nm | ||