Necessary preliminary tasks
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
- Remove rear underbody protection
GS6-17DG/BG and GS6-37DG/BG transmissions only.
Disconnect plug connection (1) on reverse gear switch.
Remove reverse gear switch.
Tightening torque 23 14 1AZ.
NOTE:
Illustration similar
Fig 1: Identifying Plug Connection On Reverse Gear Switch (GS6-17DG/BG And GS6-37DG/BG Transmission)
GS6-53DG/BG transmission only
Disconnect plug connection (1) on reverse gear switch.
Remove reverse gear switch.
Tightening torque 23 14 1AZ.
NOTE:
Illustration similar