23 14 550 Removing/replacing zero gear sensor: Notes
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
After installing the zero gear sensor, it is necessary to teach in the position of the zero gear sensor again.
Calibration is carried out using the BMW Diagnosis System "Service Function" (Learn/record zero-gear sensor).
Calibration is carried out using the BMW Diagnosis System "Service Function" (Learn/record zero-gear sensor).