23 21 Transmission Shafts
WARNING: This page is about a different car, the 2009 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION SHAFTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output flange | S5D 200G/S5D 250G/S5D260Z/S5D 310Z/S6S 420G | Collar nut installed with bolt cement | ||
| Pretension Release | 190 Nm | ||||
| Tighten down | 120 Nm | ||||
| S5D 280Z/S5D 320Z | Collar nut installed with bolt cement | ||||
| Pretension Release | 170 Nm | ||||
| Tighten down | 130 Nm | ||||
| S5D 390Z | Collar nut installed with bolt cement | ||||
| Pretension Release | 200 Nm | ||||
| Tighten down | 145 Nm | ||||
| GS6-37BZ/GS6-17BG | Collar nut installed with bolt cement | ||||
| Pretension Release | 170 Nm | ||||
| Tighten down | 120 Nm | ||||
| GS6-53DZ | Collar nut installed with bolt cement | ||||
| Pretension Release | 200 Nm | ||||
| Tighten down | 140 Nm | ||||
| GS7S47BG | Collar nut installed with bolt cement | 200 Nm | |||
| 2AZ | Gear to countershaft | 265/Sport | M10 | 60 Nm | |