17 22 Oil Cooler Pipes
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL COOLER PIPES
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 5AZ | Cap nut on transmission oil cooler (on radiator) and on transmission | All | M18 x 1.5 | 20 Nm | |
| 5HP30 | M22 x 1.5 | 28 Nm | |||
| 6AZ | Oil lines on transmission | ||||
| Hollow bolt | All | M16 x 1.5 | 37 Nm | ||
| 7AZ | Oil lines on transmission oil cooler | A 5 S 300 J | 28 Nm | ||
| Hollow bolt | All | M14 x 1.5 | 27 Nm | ||
| 8AZ | Screw-in fitting on transmission | All | M14x1.5 and M16x1.5 | 37 Nm | |
| 9AZ | Oil hose on oil pipe | E23 | 28 Nm | ||
| 10AZ | Oil pipe bracket on radiator | E23 | 2 Nm | ||
| 11AZ | Oil pipe bracket on body | E23 | 6.5 Nm | ||
| 12AZ | Oil cooler on transmission | 5HP30 | 10 Nm | ||
| 13AZ | Transmission oil cooler line to transmission | N42 | M8 | 21 Nm | |