12 41 Starter and Mounting Parts
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STARTER AND MOUNTING PARTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Starter motor mounting to transmission bell housing | All, except N51, N52, N52K, N53, N54 | 45 Nm | ||
| 2AZ | Support to starter | All | M5 | 5 Nm | |
| 3AZ | Support to crankcase | All | 47 Nm | ||
| 4AZ | Electrical leads to starter | ||||
| All | M5 | 5 Nm | |||
| All | M6 | 7 Nm | |||
| All | M8 | 13 Nm | |||
| 5AZ | Bolt connection, pole tube | All | M6 | 6 Nm | |
| 6AZ | Heat shield to starter motor | M6 | 6 Nm | ||