12 62 Coolant Temperature
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Temperature sensor to water flange (glow time/coolant temperature gauge) | M21 | 18 Nm | ||
| M51 | 13 Nm | ||||
| 2AZ | Temperature switch (5.5°C/17°C) to fuel filter/cylinder head | M21 | 18 Nm | ||
| 3AZ | Coolant temperature sensor (2- pin plug-in connection) | S38/S50 | 13 Nm | ||
| S85 | M12/1.52 | 13.5 Nm | |||
| All/others | 20 Nm | ||||
| 4AZ | Remote thermometer sensor (2-pin plug-in connection) | All | 20 Nm | ||
| Remote thermometer sensor (4-pin plug-in connection) | M62 | 16 Nm | |||
| S62 | M12 x 1.5 | 14 Nm | |||
| 5AZ | Remote thermometer sensor on coolant flange | S50 | 18 Nm | ||
| 6AZ | Temperature sensor - air | S38/S50 | 13 Nm | ||
| 7AZ | Temperature sensor - oil | S38/S50 | 13 Nm | ||