11 22 513 Replacing roller bearing for dual-mass flywheel

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Flywheel removed!

Position special tool 11 2 010 in roller bearing.

Twist out roller bearing with special tool 11 2 343.

Fig 1: Removing Roller Bearing Using Special Tool (11 2 343)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble special tools 11 2 350 and 005500 MANDREL .

Drive in roller bearing with special tools 11 2 350 and 005500 MANDREL in direction of arrow as far as it will go.

Fig 2: Driving Roller Bearing Using Special Tools (11 2 350 And 00 5 500)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.