11 22 500 Removing and installing/replacing flywheel (S65)

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRANSMISSION .
Remove CLUTCH .

Secure flywheel (1) with special tools 11 9 263 and 11 9 260 HOLDER .

Fig 1: Securing Flywheel Using Special Tools (11 9 263 And 11 9 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Release flywheel screws with special tool 11 4 180.

Tightening torque: 11 22 1AZ .

Fig 2: Removing Flywheel Screws Using Special Tool (11 4 180)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.