11 31 Camshaft
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CAMSHAFT
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Chain tensioner |
S65 |
M26x1.5 |
Insert screws dry |
65 Nm |
| 2AZ Bearing pin to crankcase and both cylinder heads (sliding rail) |
S65 |
M8 |
|
20 Nm |
| 3AZ Bearing cap of camshafts to cylinder head |
S65 |
M7x1 |
|
13 Nm |