00 00 M10 and M10 x 1 - maximum tightening torques
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - M10 AND M10 X 1 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface color/(surface coating) | |||
| M10 thread | yellow (ZN) | M10 8.8 | 47 Nm | |
| silver (ZNS) | M10 8.8 | 38 Nm | ||
| yellow (ZN) | M10 10.9 | 66 Nm | ||
| silver (ZNS) | M10 10.9 | 56 Nm | ||
| yellow (ZN) | M10 12.9 | 79 Nm | ||
| silver (ZNS) | M10 12.9 | 62 Nm | ||
| M10x1 thread | yellow (ZN) | M10 x 1 8.8 |
54 Nm | |
| silver (ZNS) | M10 x 1 8.8 |
41 Nm | ||
| yellow (ZN) | M10 x 1 10.9 |
75 Nm | ||
| silver (ZNS) | M10 x 1 10.9 |
60 Nm | ||
| yellow (ZN) | M10 x 1 12.9 |
91 Nm | ||
| silver (ZNS) | M10 x 1 12.9 |
67 Nm |