32 31 241 Replacing adjusting lever for steering column
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove STEERING COLUMN (except on E84)
If necessary, remove cable duct from steering column.
Unclip adjusting lever.
Installation:
Align adjusting lever to steering column and attach straight to prevent the locks from being damaged.
Check locks after attachment, replace adjusting lever if necessary.