32 00... Moving vehicle into design position
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Version with air spring system:
- Remove ignition key
- If necessary, pull fuse for air supply system control unit
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to Technical Data
See REAR AXLE - RIDE HEIGHT
or REAR AXLE - RIDE HEIGHT E90
).
Measure RIDE-LEVEL HEIGHT OF VEHICLE