11 11 Engine Block, Cylinder Crankcase S65
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATION
| Bore stage 0 (1) | mm | 92.000 +0.014 | ||
| Bore stage 1 a) | mm | 92.200 +0.014 | ||
| Permitted out-of-round of cylinder bore a) | mm | 0.007 | ||
| Permitted conicity of cylinder bore a) | mm | 0.007 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||