11 13 Oil Pan
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS (OIL PAN)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Oil drain plug | All | M12 x 1.5 | 25 Nm | |
| All | M18 x 1.5 | 35 Nm | ||
| All | M22 x 1.5 | 60 Nm | ||
| 2AZ Oil pan on engine block | All | M6 8.8 | 10 Nm | |
| All | M6 10.9 | 12 Nm | ||
| N40 / N42 / N45 / N46 | M8 8.8 | Replace screws | 30 Nm | |
| All others | M8 8.8 | 22 Nm | ||
| Oil sump, lower section to upper section | All | M6 8.8 | 10 Nm | |
| All | M8 8.8 | 22 Nm | ||
| Oil sump bottom section to top section with microencapsulated screws | All | M6 10.9 | Replace screws | 12 Nm |