11 22 Flywheel
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS (FLYWHEEL)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flywheel to crankshaft | ||||
| Manual transmission flywheel to crankshaft | S62 / M60/1 / M60/2 / M62 | Do not install with screw retaining compound. Bolts are a component part of the flywheel. Screw threads oiled. | 105 Nm | |
| Manual transmission flywheel to crankshaft | M40 / M42 / M43 / M43TU / M44 / M70 / S70 / M73 / M57TU | Replace screws | 120 Nm | |
| All others | Replace screws | 105 Nm | ||
| Automatic transmission flywheel to crankshaft | N62 / N73 | Replace screws | 105 Nm | |
| All others | Replace screws | 120 Nm | ||
| Manual transmission flywheel to crankshaft | N62 | Do not install with screw retaining compound. Bolts are a component part of the flywheel. Screw threads oiled. | 120 Nm |