LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2734 (Rear Axle - Special Tools - E90) >> Rear Axle >> 335040 Open-end wrench >> Open-end wrench Minimum set: Mechanical tools MW >> Notes

Open-end wrench Minimum set: Mechanical tools MW: Notes

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Open-end spanner SW50 with retaining clip For releasing and tightening down the insert nuts for the screw connection of the propeller shaft on the rear axle final drive.