LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2734 (Rear Axle - Special Tools - E90) >> Rear Axle >> 333260 Tool >> Tool Minimum set: Mechanical tools MW >> SI number

SI number

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

01 05 90 (207)

Consisting of:

3 = 0492290 Sleeve

NOTE: (fitting bush) For extracting the wheel bearing from the wheel carrier - Series: E31, RR1

4 = 0492291 Sleeve

NOTE: (fitting bush) For fitting the wheel bearing into the wheel carrier - Series: E31, E34, E38, E46/16, E52, E53, E83, RR1

7 = 0492294 Washer

NOTE: (thrust washer) For fitting the drive flange - Series: E31, E34, E38, E46/16, E52, E53

2 = 0492289 Sleeve

NOTE: (spacer sleeve) For extracting the wheel bearing from wheel carrier and for fitting the drive flange - Series: E31, E34, E38, E46/16, E52, E53, E83

5 = 0492292 Washer

NOTE: (thrust washer) For fitting the wheel bearing into the wheel carrier - Series: E31

6 = 0492293 Sleeve

NOTE: (fitting bush) For fitting the drive flange and for extracting the wheel bearing - Series: E38, E52, E53, E60, E61, E83, RR1

8 = 0492295 Washer

NOTE: (support disc) for fitting the wheel bearing - Series: E38, E52, E53, E60, E61, E83, RR1

1 = 0492288 Spindle

NOTE: (Spindle with 2 nuts) Series: E31, E34, E38, E46/16, E52, E53, E60, E61, E83, RR1 Replaced by 33 4 300/0 496 534