Storage Location

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Extractor (331300)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

2 = 0492098 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

3 = 0492099 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

4 = 0492100 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

1 = 0492097 Connector

NOTE: (basic body) For transmission S5D 260Z, S5D 310Z and S5D 320Z;

5 = 0492101 Synchronizing key

NOTE: (Synchronizing key (old))

6 = 0492102 Synchronizing key

= 0492103

7 = 0492103 Synchronizing key

8 = 0492104 Synchronizing key

9 = 0492105 Synchronizing key

NOTE: For rear axle final drive and for installation of the camshaft sprocket on the crankshaft (M70)

1 = 0492107 Washer

NOTE: (washer)

2 = 0492108 Synchronizing key

NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5