LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2733 (Steering And Wheel Alignment - Special Tools - E90) >> Steering And Wheel Alignment >> 323140 Tool >> Tool Minimum set: Mechanical tools MW >> SI number

SI number

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

01 15 05 (200)

Consisting of:

5 = 0493765 Spindle

NOTE: Replaced by 32 3 146 (0 495 355)
Fig 1: Identifying Tool (323140)
G04739435Courtesy of BMW OF NORTH AMERICA, INC.

3 = 0494384 Ring

NOTE: (Support ring) Replaced by 32 3 145 (0 494 181)

2 = 0493558 Ring

NOTE: (Support ring) Replaced by 32 3 145 (0 494 181)

2 = 0493559 Holder

NOTE: Replaced by 32 3 146 (0 495 355)

5 = 0494181 Washer

NOTE: For adjusting the camber on the front axle.

6 = 0495355 Spindle

7 = 0495356 Bolt

NOTE: (Knurled screw)