0491522 231400 Device MW

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For inserting the radial seal ring in the plug socket of the speedometer-drive pinion

Consisting of:

1 = 0491523 Shaft

NOTE: (Press-in shaft)

2 = 0491524 Shaped part

NOTE: (shaped part)

3 = 0491525 Holding sleeve

NOTE: (Union sleeve)

Fig 1: Identifying Device (231400)

Courtesy of BMW OF NORTH AMERICA, INC.